UFP by Dexter Hub/Rotor 3.7k 545 Zinc K0843505

UFP BY DEXTER K08-435-05 UFP BY DEXTER K0843505 HUB/ROTOR 3.7K 545 ZINCUFP BY DEXTER445-K0843505 HUB/ROTOR 3.7K 545 ZINC A high quality aftermarket HUB/ROTOR 3.7K 545 ZINC corrosion resistant hub/rotor for your Volvo Penta marine transmission to ensure you’re out on the water having fun in no time. – UFP BY DEXTER445-K0843505 HUB/ROTOR 3.7K 545 ZINCOur HUB/ROTOR is used for the construction of the flex disc on the Ultra Flex Power Steering Pump. It has a 545 – .500 bolt pattern and a 3.7K 140 degrees F saturation. Our HUB/ROTOR is suitable for use with our Standard Grade Pump Shaft, 511-0004. The pump shaft and hub should be laser marked prior to assembly. – The HUB/ROTOR is one, individual hub which fits onto the back of your vehicle that is then attached to the WHEELS by pressed-in studs. This configuration creates a strong, durable wheel and drive package that will increase your vehicles performance as well as its miles per gallon. – A hub/rotor is a magnetic device used to start and/or stop electric motors and generators. This hub/rotor has a mounting diameter of 0.875 inch a shaft diameter of 0.43 inch and provides 5400 rpm at 3.7 kilowatts when operated with 208 – 230/460 volts 3 phase power. – The connector is a 545 size ziplock that uses a 3.7k ohm resistor. The resistor comes on the outboard side of the bag. There are five wires going into this connector yellow, white, green, orange and black. – This rotor and hub assembly is a direct replacement for applications that use the 545Z or 545ZC style housings. – HUB/ROTOR 3.7K 545 ZINCUFP BY DEXTER445-K0843505 HUB/ROTOR 3.7K 545 ZINC A high quality aftermarket HUB/ROTOR 3.7K 545 ZINC corrosion resistant hub/rotor for your Volvo Penta marine transmission to ensure you’re out on the water having fun in no time. – UFP BY DEXTER445-K0843505 HUB/ROTOR 3.7K 545 ZINCOur HUB/ROTOR is used for the construction of the flex disc on the Ultra Flex Power Steering Pump. It has a 545 – .500 bolt pattern and a 3.7K 140 degrees F saturation. Our HUB/ROTOR is suitable for use with our Standard Grade Pump Shaft, 511-0004. The pump shaft and hub should be laser marked prior to assembly. – The HUB/ROTOR is one, individual hub which fits onto the back of your vehicle that is then attached to the WHEELS by pressed-in studs. This configuration creates a strong, durable wheel and drive package that will increase your vehicles performance as well as its miles per gallon. – A hub/rotor is a magnetic device used to start and/or stop electric motors and generators. This hub/rotor has a mounting diameter of 0.875 inch a shaft diameter of 0.43 inch and provides 5400 rpm at 3.7 kilowatts when operated with 208 – 230/460 volts 3 phase power. – The connector is a 545 size ziplock that uses a 3.7k ohm resistor. The resistor comes on the outboard side of the bag. There are five wires going into this connector yellow, white, green, orange and black. – This rotor and hub assembly is a direct replacement for applications that use the 545Z or 545ZC style housings.

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.