Mirror Cutter Tool A Mirror Cutting Tool for Thick Glass with Mirror Cutter Oil The Amazing Glass Mirror Cutter for Beginner Or Professional Running

GLASS CUTTER FOR MIRROR REPLACEMENT WHEELS – The Easy To Remove Glass Cutting Wheels Last A Long Time And Are Always Available In Our Store. A Simple Nut To Remove The Wheel And Spare Parts Are Always Available. Can Be Purchased As A Bundle So You Can Keep One With Your Stained Glass Supplies. HOW TO CUT STRAIGHT LINES – Oil The Glass Cutting Wheel Make Sure You Do Not Hold The Glass Cutter Tool By The Grips And Use The Flat Side Of The Glass Cutting Blade To Run Up Along A Thick Very Smooth Steel Guide Or Straight Edge Like A Speed Square. Place The Glass Or Mirror Sheets On A Board At Waist Height So You Can Score The Glass And Operate The Tool Like A Professional Glass Cutter. HOW TO USE GLASS CUTTER FOR THICK GLASS – And Thin Glass Like Stained Glass , Run The Glass Scoring Wheel Up And Down A Board Of Wood After Soaking It In Oil, This Ensures The Glass Cutter Scoring Wheel Is Turning Freely So It Can Cut Thick Mirror Or Thin Glass Evenly Across The Surface Of The Glass Sheets. This Is Also The Same Technique To Use The Glass Cutter For Windows Window Pane Mirror And Mosaic Glass Tile HOW TO CUT GLASS TILE – Mosaic Tile On A Sheet Are Difficult To Cut With A Wet Saw As The Edges Chip, The Amazing Glass Cutter Is The Best Glass Tile Cutter , Glass Tiles Can Be Scored All At Once But Must Be Split Individually, All Glass Tiles Are Different So Practicing With The Glass Cutter For Mosaic Is Essential, Start Scoring The Tile With Firm Pressure All Across, Gradually Lighten The Pressure To Get To A Stage Where You Are Scoring Firm Enough To Leave A Line Without Chipping The Glass. STAINED GLASS CUTTER – Holding The Glass Cutter Per Instructions Not By Handles Allows You To Use Glass Cutter For Stained Glass Always Pull Glass Cutter Towards You When Scoring, Score Firmly All Across The Glass, You Can Draw A Line And Follow It By Looking At The Back Of The Wheel You Do Not Need To Go Fast Just Firmly Along The Surface Of The Glass Mirror Or Mirror Tile. After Little Practice I Guarantee This Will Be One Of Your Favorite Glass Cutters Tools Of All Your Stained Glass Tools. Glass Cutter for Mirror – Not just any Glass Cutting Tool The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight radius and wavy lines in glass mirror, stained glass and glass tiles. The scoring wheel is not sharp, it is probably the dullest tool you will own but the hardest, the hardness of the cutter blade along with the special angle ground into the scoring wheel allows The Amazing Glass Cutter to cut thick and thin glass materials and even Hard Tile without hurting the wheel. The Secret to using The Amazing Glass Cutter is to follow the instructions carefully. Practice on a spare piece in order to work out enough pressure to apply, usually not enough pressure is applied to start with but sometimes less pressure is better so practice makes perfect. Cutting on the floor instead of on a solid board at waist height will fail and give uneven pressure along the score line and may even crack glass. Not oiling the scoring wheel and making sure it is turning very freely may cause the wheel to bind, drag and even lock up and just scratch the glass instead of evenly scoring it and this will prevent the glass cutter from working correctly. Holding the Glass Cutter by the plastic grips when scoring with your strongest hand means that you are only applying minimal amount of pressure if any on the cutting wheel at the point where the scoring is happening. Always Pull towards you not push Away. For Stained Glass, Plate Glass, Picture Framing Glass or Fused Glass the cutting wheel should be oiled every single score, oil will run down onto the glass and will not only cool down the glass and give a cleaner cut it will also extend the life of the cutting wheel. If you can wipe the oil off the glass and there is no score line visible, then you need to increase the pressure – make sure you are holding close to the wheel and use the 2 handed method if needed especially if you do not have a lot of strength in your hands or are cutting a very hard material.

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.