DSPIAE Departure Tool Combo Set TC-S01

Departure” Tool Combo Set TC-S01 DSPIAE Plate Pickup Basic version single edge cutter Due to the height difference design of the single-edged scissors, the center nozzle needs to be trimmed with a pen knife or file after cutting. When cutting the runner, it is normal that the runner and blunt surface have slight indentation Engraving pen repair parts Daybreak Carving Pen For nozzles that cannot be handled by the scissors at one time, use the dawn engraving pen for secondary trimming Please use the engraving pen in a standardized manner, and do not use it for dangerous operations to avoid injury. Please make sure to install the nib in place to avoid the nib falling off during use. After use, please cover the pen cap to prevent accidental drop from causing injury or product damage. The nib of the engraving pen is a consumable item, please replace the blade in time after long-term use, so as not to affect the cutting effect. Part grinding Semi-Rigid Grinding Stick (General Grinding) Carbon fiber grinding plate + durable adhesive sandpaper (flat grinding) Sponge gauze (surface grinding) Glass polishing file (transparent parts grinding) Fine operation Straight tweezers | Bend tweezers to pick up water stickers or small parts for fine operation Parts seepage Phoenix Feather Liner Pen Submerge the seepage liquid over this caliber Dip in an appropriate amount of seepage liquid and do not exceed the caliber. Gently scrape off excess line seepage on the mouth of the bottle. After determining the position of the seepage line, press lightly with the tip of the pen, and the line seepage liquid will flow into the groove by itself. After the line seepage liquid is evenly covered, lift the line penetration pen, and wait for it to dry to complete the line penetration. (It is recommended to use DSPIAE T-08 enamel paint thinner to wipe off excess line seepage) Line pen maintenance Just wipe it clean after use (it is recommended to use DSPIAE T-03 coating tool cleaning fluid) Wrong assembly and disassembly push opener Putting away the cutter head in time after use can effectively avoid the risk of dropping and damaging the cutter head. Please handle with caution as this product contains sharp parts. Please store it in time after use. Package included: TC-S01 Starter·Tool Set 1 x Tool Storage Box 1 x Basic Single Edge Cutter 1 x push opener 1 x Daybreak Sculptor 20 x Engraving pen replacement nibs 1 x Durable Sponge Sandpaper #400 (3mm) 1 x Durable Sponge Sandpaper #800 (3mm) 1 x Durable Sponge Sandpaper #1200 (3mm) 1 x Heavy Duty Adhesive Backed Sandpaper #400 1 x Heavy Duty Adhesive Backed Sandpaper #800 1 x Durable Adhesive Backed Sandpaper #1000 1 x Durable Adhesive Backed Sandpaper #1200 1 x Durable Adhesive Backed Sandpaper #1500 2 x Carbon Fiber Sanding Plates 1 x Semi-rigid sanding stick #600 1 x Semi-rigid sanding stick #800 1 x Semi-rigid sanding stick #1200 1 x Glass Polishing File 1 x straight tweezers 1 x Angled Tweezers 1 x scissors

Order Processing: After your payment is authorized and verified, we will start processing your order and this process can take from 1 to 2 business days, so please be patient with us. If we are unable to process your order due to inaccurate or incomplete payment or incorrect address information, your order processing may be delayed.

Carrier: UPS/FedEx/USPS. Delivery Timescale: More than 90% of orders arrive in 10 business days after despatch.

FREE RETURNS on all orders!
The following conditions must be met:

1. Items must be returned within 30 days after the purchase date.
2. Items must be unworn, undamaged and in original packaging.